200-U Type Constant-Custom Design
– Designed for 21,269 lb. load
– 26-1/4″ W x 80″ L x 28-1/2″ H
– 10″ upward travel
– 12″ total travel
200-U Type Constant
200-U Type Constant
– Designed for 18,273 lb. load
– 26-3/8″ W x 66″ L x 23-1/4″ H
– 0.43″ downward & 1.22″ upward travel
– 3″ total travel
100-G Type Constant
100-G Type Constant
– Load range: 15,226 lb. to 17,210 lb
– 13″ W x 87″ L x 59″ H
– 2.8″ downward travel
– 4″ total travel
200-U Type Constants
200-U Type Constant-Custom Design
– Load Range: 14,060 lb. to 18,334 lb.
– 27″ W x 84″ L x 24-5/8″ H
– Actual Travel Range: 10″ to 11″ Upward
– Total Travel Range: 12-1/2″ to 13-1/2″
Do you see a need for constant spring supports in your plant? Get pricing today!
Variable Springs for a Project in MexicoClose Up of G-can
This Type G variable spring was manufactured for a Petrochemical Plant in Mexico. The Type G assembly is formed by welding two standard spring assemblies to the ends of a pair of channels. This type of assembly can accommodate unusually heavy loads, and is especially convenient for avoiding interference in spaces where headroom is limited.
Each spring assembly is loaded per the client’s specification at Piping Technology and Products manufacturing facilities. A travel stop is inserted and strapped in place to maintain the load for the assembly installation. In addition to banding the travel stops, the variables for this project required chained travel stops. The base style (F-Type) variables on this project were also required to have internal guides.
At Piping Technology and Products, Inc. we use PTP-1, PTP-2, PTP-4, PTP-6 and PTP-8 to designate the five standard coil arrangements to increase the working range of travel of variable supports.
Several types of variable supports were made for this particular project. They included Type A, Type B and Type F.
Do you require variable spring supports in your piping system? Get pricing today!
B-Type Constants for a Power Plant in KentuckyB-Type Constants for a Power Plant in Kentucky
These constants were fabricated from carbon steel hardware and structure. The vertical constants are used to support pipes and other equipment. They range from 4 to 6 feet and weigh between 690 lbs to 2,850 lbs. The constants have a total travel capacity of 7 to 8 . Standard load testing was completed to ensure quality and performance.
Want to learn more about constant springs? View a constant webinar today!
U-Type Constants for an Oil Refinery in TaiwanConstants in Assembly
These Figure 200 U-Type horizontal upthrust constants are designed to support piping from below. They are fabricated from carbon steel. These constants were also hot dipped galvanized and then specially painted. In addition, they are able to handle loads of up to 13,600 lbs. Each constant has a capacity of 4 total travel. They range from 55 to 62 long. Load testing and external inspections were completed to ensure the quality of these constants.
Want to learn more about constants? View a constant spring webinar today!
These PTP 100-B type constants were fabricated from A36 carbon steel. They are vertical constants designed to suspend from a beam to support pipes. These constants are capable of handling loads of up to 31,000 lbs. and have a total travel capacity of 3. Each measured 25 long, 13 wide, and 71 tall and weighed 1,850 lbs. Standard load and travel testing were completed to ensure the quality and performance of these constants.
Do you see a need for constants in your piping system? Let us price them today!
Horizontal Upthrust Constants for a Power PlantMultiple Constants During Inspection
The horizontal upthrust constants (Fig. PTP200-U) were fabricated from carbon steel and chrome-moly for a Heat Recovery Steam Generator. The constants range in sizes PTP-200 size 3 to 65 and weigh from 24 lbs to 1,300 lbs. They support loads of 100 lbs to 8,100 lbs. The constants support pipes and equipment subjected to vertical movement due to thermal expansion at locations where transfer of stress to other supports or equipment can be critical. Horizontal upthrust constants are utilized in areas where horizontal travel is unacceptable. Standard testing was completed for performance and quality assurance.
Want to learn more about constant springs? View a constant webinar today!
Piping Technology & Products, Inc. Performed Field Services for a Power Generating Plant in Texas
PT&P was contracted to assist in the determination of pipe support maintenance at a power plant in Texas. The constant effort support springs with loads of excess of 9,500 lbs and the variable spring supports with loads of 450 lbs were marked for needing attention.
Cleaning Variable Spring UnitInspecting Variable Springs for Performance
PT&P’s objectives were to:
* Evaluate the pipe supports
* Determine state of performance
* Provide a plan of action
* Train personnel on-site to perform adjustments and replacement of supports or support components
* Provide final inspection of modified supports
After Cleaning & Preparation of the ConstantFinal Assembly with Added Slide Plates
The pipe supports needing attention could not be set to the required installation position. A plan was initiated to recondition some of the support components such as turnbuckles and rods. This would allow a greater range of field adjustment to the pipe supports. During a planned shut-down, PT&P Field Service Units returned to the site to modify the existing supports. The initial phase of the modifications included bracing the piping in order to isolate and lock the supports in position. Then, they were disconnected from the system and modifications to the assemblies were completed. Afterwards, the supports were reinstalled and any necessary adjustments were completed. A total of eight pipe supports were modified or adjusted.
Upthrust 200-U Type Constants for an Oil RefineryUpthrust 200-U Type Constants for an Oil Refinery
The upthrust constants (PTP Fig. 200-U) were fabricated from A36 carbon steel. Weighing at 4,150 lbs each, they measure 94” long, 27” wide, and 43” tall. They support loads from 90,700 lbs to 93,000 lbs with 4” of vertical travel. In addition, they are custom designed with extra supporting points for heavier loads. They are used to support the piping system from beneath the pipeline. Upthrust constants only allow for vertical travel and are used where horizontal travel is unacceptable. Standard load and travel testing was completed to assure quality and performance.
Do you require u-type constants in your plant or refinery? Let us price them for you now!
88 Constant Supports for a Hydrogen Reformer Plant
These Figure PTP100-A size 40 and 51 constant supports, made of A36 carbon steel, are used to support pipeline systems. Each is 24″ long, 10 1/2″ wide, and 51 1/2″ high. These constants are capable of supporting loads ranging from 1,165 lb. to 2,260 lb. with a travel range of 13″ to 14 1/2″. PT&P specifically designed and fabricated each constant for specific dimensions provided by the customer. Standard load and travel testing was completed for quality assurance.
Do you require constants in your plant or refinery? Let us price them for you today!
Constant Hanger Supports for a Power Recovery Plant
Constant support hangers are used to support pipes subjected to vertical movement. The (Fig. PTP 200) constants are designed to support loads from 4,000 lbs to 57,000 lbs. Each weighs approximately 1,500 lbs to 2500 lbs and has a travel of up to 4″ with an adjustable travel stop. Their sizes range from 15 to 100.
The advantage of an adjustable travel stop is that the constant is able to “lock in” at any position within the range of travel for a given constant. This alleviates the need for a total “shut down” of the piping system for temporary conditions such as hydrotesting, repair, or replacement.
Want to learn more about constants? Instantly view a past constant webinar today!
