Have a look at PT&P’s new product pages on stg-httpspipingtechcom-stagingdev.kinsta.cloud. All product pages now features:
– All information in one place
– New photos and videos
– Downloadable tables and charts
– Simple Request A Quote forms
| Type: | Big Ton Spring Supports |
| Material: | A36 carbon steel | Hot-dipped Galvanized | SS Slide Plates |
| Design: | 16,276 lb. Ld. | 0.196″ Up Travel |
The big ton spring support is used for supporting large heavy units such as compressors, vessels and pumps in power and petrochemical plants. The housing and frame are fabricated from carbon steel and the spring coils are coated in neoprene. Polished stainless steel slide plates are added to the top of the load flange, which reduces the coefficient of friction to allow for lateral movement. This big ton spring support is designed to allow limited movement of 0.196″ upwards, with an operating load of 16,276 lb. This big ton spring enabled the client to reduce engineering man hours by avoiding the redesign of the piping system due to limited space requirement.
Read MorePT&P’s Bulletproof Protection Shield provides safety for defense personnel with head-to-toe protection. It also enables mobility during one onto one incidents.
Learn more about this critical defense product in this video.
All new design, new organization, and new resources to help you get the job done right the first time. Checkout our new web site intro video to get a complete overview of what to expect.
| Type: | Trunnions for Cryogenic Temperatures |
| Size: | 8″-24″ Dia. | 12″-18″ L | 6″-15″ W | 6″-40″ H |
| Material: | Micarta® G-10 Insulation | CS | SS |
| Design: | Cryogenic Temperatures of -320°F |
| Testing: | MTR’s | Non Destriuctive (PMI) | Q.C. |
PT&P custom designed trunnions for a cryogenic pipeline at an LNG facility in Australia. The insulated supports were fabricated with carbon steel base plates, 304L stainless steel plates and fasteners. To prevent cryogenic temperatures of -320°F from transferring to the base of the trunnion support, Micarta® G-10 was used as insulator. The trunnions were designed to support pipe sizes from 8”-24” with dimensions ranging from 12”-18” in length, 6”-15” in width and 6”-40” in height. MTR’s were provided, and non-destructive testing (PMI) was preformed, along with standard Q.C. inspection prior to shipment.
This type of support is available in pipe sizes between 1/2″ to 42″ NPS; however, PT&P can customize any size needed. The standard material for these supports are galvanized or hot-dipped galvanized carbon steel. These supports were customized with Micarta® instead of the standard high density polyurethane with vapor barrier. When ordering, specify pipe size, insulation thickness and length. See more on Figure CS-6030 from our cryogenic pipe supports section.
Piping Technology & Products and Pipe Shields have been a major international supplier of pipe shoes and pre-insulated supports for more than 10 years. Our cryogenic pipe supports comply with the following standards ANSI / ASME B31.1 & B31.3 and The Manufacturers Standardization Society SP-58, 69, & 89.
Read More
| Type: | Cryogenic Pipe Supports |
| Size: | Pipe Size of 1” to 36” |
| Material: | LTCS Material Tops, Stainless Steel, & Micarta® G-10 Insulation |
| Design: | -50°F |
| Testing: | PMI |
Piping Technology and Products supplied these cryogenic and axial stop cold shoes for an LNG facility in Australia. The cryogenic pipe supports were fabricated with LTCS material tops, stainless steel and Micarta® G-10 insulation blocks. They were a wide range of lengths from pipe size of 1” to 36”. The cryogenic temperatures are low as -50°F. A special paint system was used for the carbon steel components to resist rust. PMI testing was performed on the stainless parts prior to the 4-6 week shipping.
Read More
| Type: | Cryogenic Pipe Supports |
| Size: | Pipe Size of 1” to 36” |
| Material: | LTCS Material Tops, Stainless Steel, & Micarta® G-10 Insulation |
| Design: | -50°F |
| Testing: | PMI |
Piping Technology and Products supplied cryogenic pipe supports with axial stops for an LNG facility in Australia. The cold shoes were fabricated utilizing low temperature carbon steel, stainless steel and Micarta® G-10 insulation blocks. We supplied a wide range of lengths and pipe sizes from 1” to 36”. The cryogenic temperatures are low as -50°F. A special paint system was used for the low temperature carbon steel components to resist rust. PMI testing was performed on the stainless parts. Delivery was within 4-6 weeks.
Read More
| Type: | High Temperature Pre-Insulated Pipe Supports with Slide Plates |
| Size: | 15″ Long | 23″ Wide | 4.5″ Insulation |
| Material: | Calcium Silicate, Firetemp®, Carbon Steel with HDG, UHMW Polyethylene |
| Design: | 750°F, 1,325 lb Operating Load, & 12″ Pipe Size |
| Testing: | Standard Quality Control |
PT&P custom designed these pre-insulated pipe supports for high temperatures at an ethylene production facility in Texas. The hot shoes are 15″ long and 23″ wide with 4.5″ thick insulation. The insulation is comprised of calcium silicate and Firetemp®. The hot shoes were fabricated from carbon steel with a hot-dipped galvanized finish and the slide plates from UHMW Polyethylene. They are designed as a 2-way guide than can support loads in two directions. They are designed for a pipe size of 12″ in diameter with an operating temperature above 750°F and on operating load of 1,325 lb. Standard quality control tests were performed with a 4-week turn-around time.
Read More