List | Piping Technology & Products, Inc.

PTFE, 25% Glass Filled Slide Plates Bonded to Stainless Steel Backing Plates

October 17, 2011

The slide plates are comprised of 1/4″ thick PTFE, 25% glass filled slide plates bonded to 1/8″ A240 grade 316 L stainless steel backing plates. Stainless steel was used for better resistance to corrosion and longevity. The assemblies measure 83″ long by 20″ wide and will be installed underneath a bridge. A total of 16 slide plates were fabricated and designed for a pressure of 500 psi at ambient temperature. PTFE, 25% glass filled material provides a low coefficient of friction, is easy to install, does not require surface treatments, or grouting, and is unaffected by weather conditions.

Ladders and Pressure Vessel Platforms for a Delayed Coker Unit Stripper Tower in California

October 3, 2011

The ladders and platforms were designed to be installed on a 90′ tall pressure vessel. The ladders were fabricated from carbon steel and ranged in size from 5′ to 38′ in length. The vessel platforms were also fabricated from carbon steel and measure up to 16′-6″ in diameter.

Do you require ladders or platforms for a vessel or tank? Let us serve your needs today!

U-Type Constant Springs Custom Designed for Large Travel for an Oil Refinery

September 19, 2011

These figure 200 U-type constant springs were fabricated from A-36 carbon steel and range in size from 30-1/2″ to 41″ in height, 25″ to 31″ in width, and 68″ to 80″ in length. These are horizontal constants designed to support piping from below where the base plate is bolted directly to the top of the steel or the foundation using anchor bolts. Loads range from 9,000 lb. to 42,000 lb., and vertical movements range from 6″ to 11″. All the constants went through standard load and travel testing per MSS Standards prior to shipment.

Want to learn more about constant springs? Instantly view a recording of a past webinar.

F-type Variable Spring Support with a Stainless Steel Wire Rope Isolator

September 6, 2011

This F-type variable spring support was customized with a wire rope isolator for a facility located in Canada. The variable spring was designed for a load of 12,000 lb. The wire rope isolator is essentially a 1.25″ diameter stainless steel rope looped eight times between two chemically conversion coated aluminum alloy retaining bars. The wire rope isolator is effective in vibration isolation and energy absorption.

Need a similar support? We’d be happy to serve your needs!

24" Bolted Clamp Pipe Shoe with Slide Plates for a Radiant Syngas Cooler Piping System

August 29, 2011

These customized bolted clamp pipe shoes with PTFE, 25% glass filled slide plates were fabricated for a radiant syngas cooler piping system in Indiana. The supports were designed for 24″ diameter piping with a pressure of 2,256 psig at 350°F. The axial displacement is +/- 1.326″ facilitated by slide plates on three quadrants. These pipe shoes were custom designed and fabricated entirely from carbon steel with a hot-dipped galvanized finish.

Do you have a requirement for bolted clamp pipe shoes? Let us price it today.

In Memory of a Past Salesman and Friend, Terry McCormick

August 26, 2011

Terry tribute

Terry McCormick
December 9, 1930 – August 19, 2011

Terry will be greatly missed and remembered!

Chptr232

Ptp sales team 1989

Terry collage

Webinar Giveaway: PT&P Nalgene Water Bottle

August 22, 2011

If you would like a chance to win, simply attend one of our Webinars. If you want more chances to win or even win more than once, attend as many Webinars as we offer.

Register for the next Webinar

During the live presentation, attendees will be selected at random to receive a free PT&P Nalgene Water Bottle.
Open to U.S. and Canada Shipping only. Must be present the entire length of the Webinar to be eligible.
To receive the prize, you must be able to provide a valid mailing address within 24 hours after your name is announced.
Webinars are approved for 1 PDH credit hour for Texas Professional Engineers. After attending the live Webinar, email your request to enews@pipingtech.com.

Cold Insulated Pipe Anchors with Axial Stops

August 15, 2011

Cryogenic pipe supports, ranging in diameter from 6″ to 38″, were designed to support and insulate piping in an LNG receiving and regassification plant. The “cold shoe anchors” were designed for temperatures down to -260°F and a load range of 26,000 lb. to 210,000 lb. A combination of high density polyurethane foam (PUF) and Permali® was used for the insulation. The center stops that are welded to the process pipe were built from 304 stainless steel, and carbon steel was used for the remainder of the shoe.

Do you have a need for cold shoes in your piping system? Get pricing today!

We're now on facebook! Like our page for a chance to win an iPad 2.

August 9, 2011

We’re now on facebook!

Click the like button for a chance to win an iPad 2.

Our facebook fans are also…

the first to see the release of new products
included in facebook-exclusive drawings and give-aways
have access to the latest technical videos we have to offer
able to ask questions and get answers right away

Details:
– Drawing will be on Wednesday 8/31/2011 at 12 noon CDT
– Current facebook likers will be included in this drawing
– Winner will be notified by facebook message and has until Friday 9/2/2011 at 12 noon CDT to reply back with a valid mailing address to ship the iPad to (if there is no response by Friday 9/2/2011 at 12 noon CDT, an alternate winner will be selected).

Variable Spring Supports for a Gas Storage Facility in Abu Dhabi

August 1, 2011

A total of 90 variable spring supports were designed and manufactured to support pipe lines in a gas storage facility in Abu Dhabi. The pictures above show PTP-4 Double Spring B-Type, PTP-6 Triple Springs B-Type, PTP-1 Triple Springs D-Type, and PTP-4 Double Springs F-Type, (also known as F-Cans). Load capacities range from 1,000 lb. to 45,000 lb., and movements range from 3/8″ to 3″. A two-layer custom paint was applied over the hot-dip galvanized finish to protect against a severely corrosive environment. Travel stops were chained to the spring can housing, so they can be reused during plant shutdowns. Load and quality assurance tests were performed on all the supports prior to shipment.

Need variable spring supports for your piping system? Get pricing today.

Our Subsidiaries

Blog