List | Piping Technology & Products, Inc.

Riser Clamp Assemblies with Neoprene Lining

May 7, 2004

Piping Technology and Products, Inc. custom designed eight sets of riser clamp assemblies for an oil rig in the Gulf of Mexico. These riser clamp assemblies were fabricated from API 2H GR. 50 carbon steel. They were designed to support vertical pipe lines on an offshore platform. Each set equipped with a neoprene lining consists of two clamps and a clamp stand. Several coats of marine paint finish were applied to the assemblies to prevent corrosion due to high salt water content and open air exposure.

Do you require riser clamps in your piping system? Get pricing today!

240 Welded Eye Rods for an Ammonia Plant

April 30, 2004

Piping Technology and Products, Inc. designed and manufactured 240 PT&P Figure 110 welded eye rods for an ammonia plant in Saudi Arabia. The rods will be attached to Type A variable springs designed to support loads from 850 lb. to 13,300 lb. Manufactured from A-36 carbon steel, the rods are 3/4 to 2 in diameter and range in length from 68 to 95. To prevent contamination at high temperatures, a red oxide primer with an alkyd topcoat was applied to the rods as per the customer’s request. Prior to shipment, a 100% dye-penetrant test was performed to ensure quality.

Do you have a requirement for welded eye rods in your current job? Get pricing now!

Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

April 16, 2004

Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan. These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.

Do you see a need for hold down clamps in your piping system? Get pricing today!

90,000 lb. Load Big Ton Springs for a Chemical Plant

April 9, 2004

Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.

Do you require big ton springs in your current or future job? Get pricing today!

April 2004 News

April 4, 2004

Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to info@pipingtech.com or 1+713-731-8640 (fax) for an immediate quote.

PHDS Software

Software Features

Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
Use a built-in function to submit drawing data to PT&P for quotation

13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

April 2, 2004

Piping Technology and Products, Inc. recently designed and fabricated more than 75 pipe shoe and Bronzphite® slide plate assemblies for an oil refinery in Texas. Each assembly consists of two pipe clamps, a base plate and a maintenance free Bronzphite® slide plate. The pipe shoes with sizes ranging from 18 to 24 are fabricated from A387 alloy steel. They are designed for 965°F and 2 of horizontal movement.

The 3 x 3 Bronzphite® (graphite impregnated bronze) slide plates are self-lubricating bearing plates made of a high quality bronze with graphite filled grooves. They are designed for heavy loads, low velocity applications, and for situations where the use of oil or grease is undesirable or unfeasible.

Do you require pipe shoes or slide plates in your piping system? Let us price them for you today!

950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

March 19, 2004

Piping Technology and Products, Inc. recently designed and fabricated two 950 lb. load PTP-6 type F size 90 variable springs for an offshore oil rig. These variable springs have an overall height of 33 1/2″ and are designed for a travel range of 4″. Each variable consists of an 8 5/8″ dia. casing, a 13″ square base plate, an 8″ load flange and three spring coils with a 7 1/2″ working range. All components are fabricated from carbon steel and are hot-dipped galvanized.

Want to learn more about variable springs? Instantly view a past variable webinar!

230 lb. Double Cable Clamp for an Oil Refinery

March 12, 2004

Piping Technology and Products recently fabricated a 230 lb. double cable clamp assembly for an oil refinery in Kentucky. This cable clamp assembly, fabricated from 304 stainless steel, consists of a double clamp, a steel support structure, and a base plate. The double cable clamp with an overall dimension of 22 x 12 x 6 is designed for a 2.4 and a 3.8 dia. armored cable.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!

49,000 lb. Load Constant Springs for a Power Plant

March 5, 2004

Piping Technology and Products, Inc. custom designed and manufactured four double lug suspension PTP 100-C size 84 constants for a power plant in South Carolina. These constants are designed for a vertical travel range of 5″ and an operating load capacity of 49,000 lb. They are fabricated out of A36 carbon steel and weigh 2,900 lb. each. Prior to shipping standard load and travel tests were performed on these 20″x 35″x 80″ constants to ensure quality.

Do you see a need for constant springs in your piping system? Get pricing today!

24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies

February 26, 2004

Piping Technology and Products, Inc. designed and manufactured four PTP-8 Type C variable spring assemblies for a power plant in South Carolina. These variable spring assemblies with an average overall length of 87″ are fabricated from carbon steel. Each pipe hanger assembly consists of a variable spring, a rod, a clevis and hex nuts. The springs are designed for operating loads ranging from 22,500 lb. to 24,500 lb. and a total travel of 5″. For quality assurance, the spring coils are inspected and tested individually for proper operation.

Want to learn more about variable springs? Instantly view a variable spring webinar today!

Our Subsidiaries

Blog