Sweco Fab, Inc. designed and fabricated a complete duct system for a major engineering and construction firm in Houston. The project is a carbon dioxide facility for a food processing plant being constructed in Massachusetts.
Two unique features of the 96” ID fabrication are the very light materials with close tolerances and the painting system for food grade product.
Do you have a need for a duct system? Get pricing on a duct system today!
Pictured above are Big-Ton Spring Supports specially designed by Piping Technology & Products, Inc. These types of supports are used in supporting large and heavy units such as compressors, vessels and pumps in power and petrochemical plants. The ones below were used to support vessels in excess of 120,000 pounds. The Big-Ton Spring Support are designed to allow limited movement in confined areas. By doing this, it saves the customer from having to entirely redesign the piping system and saves thousands of dollars.
Do you need a big ton for one of your upcoming projects. Let us price one for you today!
The picture above shows two views of launcher-receivers loaded on a truck. These devices are installed in pipelines to launch and receive pipeline pigs. Pigs can be used for cleaning or for separation of two products in the same pipeline. Modern pigs with sensing devices are used in old pipelines to look for damage or corrosion problems. These launcher-receivers part of several being built by the SWECO Fab, Inc. division of Piping Technology & Products, Inc. for a large MTBE plant in Saudi Arabia.
In need of some pig launchers and receivers for an upcoming project? Let us price one for you today!
The photograph above shows a computer-controlled bank of gas torches used to burn patterns of small components from large metal plates. The geometry of the components is used to program the computer. The metal plate is on a “water table” which catches the melted material to be utilized in the national program to conserve natural resources.
Piping Technology & Products, Inc. supplies hardware, pipe supports, expansion joints and other fabricated items for petrochemical, paper and electric power plants throughout the U.S. and overseas.
Want to learn more about our various products? Visit our webinar archives today!
Pictured above denotes “galvanized embed plates” with anchors to be set in concrete.
Want to learn more about “galvanized embed plates” or about our other products? Visit our webinar archives today!
Sweco Fab, Inc., a wholly subsidiary of Piping Technology & Products, Inc., and an ASME and API code vessel shop recently unveiled their design of a wet air fan cyclone for a new high density polyethylene project.
The barrel, which is a twenty-one feet long, tapers upward from a twelve-inch diameter base to a six foot diameter top. Ears on the exterior of the barrel are provided for support and alignment. Air inlet is designed to mate with other components forming part of the process equipment. The fan cowling has outboard ears to facilitate ease of test, assembly and maintenance. The cyclone was rolled and formed from ¼ inch carbon steel and weighs 4,000 lb.
Want to learn more about Sweco Fab, Inc.? Visit out webinar archives!
The picture above shows special components of today’s piping systems. At the top are two rings with machined surfaces required to help seal the system when operating at high pressures. Rings and spacers can be fabricated from a variety of metals including carbon steels, stainless steels, alloys such as Inconel®, Hastelloy or Titanium. The choice of materials depends on the temperatures and pressures the system is designed for. Holes can be drilled to produce bleed rings which relieve pressure slowly. The above picture shows orifice plates which are made from the same materials.
Need orifice plates? Get pricing for them today!
Pictured above is one of the six identical tanks Sweco Fab, Inc. supplied for the expansion of City of Houston’s Sims Bayou Waste Treatment Plant.
These carbon steel tanks are rubber lined and have a special paint outside. Each tank has 6,000 gallon capacity.
Do you require ASME pressure vessels or tanks? Let us price them for you today!
The photographs above show insulated pipe supports designed for a system being installed in a very cold climate in Russia. The insulating components are inside next to the pipe. The outside components are galvanized steel. In the foreground of the photo at the right are two fixtures which were built for load testing these pipe supports by applying known forces with a hydraulic load cell. Piping Technology & Products, Inc., fabricated prototype units for a Houston engineering firm and tested the units. After successful tests a number of similar units were built for shipment to Russia.
In need of some new insulated pipe supports? Let us price one for you today!
The photograph above shows a launcher-receiver designed to be installed in a six inch pipe to launch and receive pipeline pigs. Pigs can be used for cleaning or for separation of two products in the same pipeline. This launcher-receiver was one of two built by the SWECO Fab, Inc. division of Piping Technology & Products, Inc. for a major Gulf Coast Refinery.
Would you like to learn more about our pig launcher and receivers? Visit our webinar archives today!
