Resources
test service nolan
In order to use pipe rollers inthis application, an insulated pipe support has to manufacture as part of theroller assembly. We use a higher density insulation so that the insulation willnot be crushed – 10 lb.14 lb. 20 lb. or 32 lb. depending on the load.
test service nolan
Piping Technology & Products, Inc. fabricated a Cantilevered Canopy for the entrance of an International State Department building. The Canopy was fabricated using ten 20-foot long girders. These girders were connected by sixty-three structural steel members. Together, they formed the 80-foot width of the Canopy. The wooden sheathing and architectural cladding that is supported by the canopy’s inner steel structure was installed at the construction site.
The fabricated girders and structural members combined weight exceeds 33,000 lb.
Piping Technology & Products also supplied the steel framing that supports the sheathing and cladding, roof drains and piping installed inside the canopy.
Want to learn more about the miscellaneous structures we provide? Watch a webinar today!
test service nolan
Piping Technology & Products, Inc. and its wholly owned subsidiary, Pipe Shields, Inc. designed and fabricated many structural pipe hangers for an on-going project to rebuild the San Francisco-Oakland Bay Bridge. The pipe hangers are made out of A-36 carbon steel and galvanized to withstand corrosion from the ocean waters and rough winds. These pipe supports will be welded to Pipe Shields’ C Model Anchor Plates, which are set in a cast concrete to the bottom cavity of the bridge.
Supports pictured utilize friction holding devices known as MegaLug®, which permit attachment to the pipes without welding. These supports were designed and fabricated to include improvements in regard to strength and durability to withstand high loads during earthquakes and other seismic events.
Do you see a need for structural pipe hangers in your application? Get pricing now!
