Resources
test service nolan
These sliding cryoshoes are fabricated from carbon steel with 2″ thick polyurethane insulation. The polyurethane is 20 lb. density, which has a compressive strength of 500 psi and a tensile strength of 600 psi. The cold shoes are designed for temperatures as low as -300°F and for loads up to 3,500 lb. They will be used to support a 60″ diameter low temperature vapor line in a Texas facility.
Want to learn more about cryogenic supports? Instantly view a past webinar now!
test service nolan
PT&P received a call to inspect spring supports in operation at a salt water cooler tower. It was quickly determined that replacement supports would be needed due to the heavy corrosion of the original supports not fabricated by PT&P.
A total of 40 constant and variable spring supports were fabricated as replacements. Each support was sealed with a neoprene coating over a hot-dip galvanized finish instead of stainless steel. This type of finish will ensure a much longer life-span. The spring supports ranged in loads from 800 lb. to 15,000 lb. with various travel ranges.
Do you need to replace some springs in your plant? Contact us for a quote today!
test service nolan
Our company is a corporate member of SPED, the Society of Piping Engineers and Designers. On October 28, 2010 SPED will celebrate it’s 30th Anniversary with the 2010 Corporate Member Showcase and 30th Annual General Business Meeting at the Houston Marriott Energy Corridor from 6 PM until 9:30 PM. Tickets are available at www.spedweb.com.
You will be able to network, see the latest products and services from SPED Corporate Members, and hear presentations from three Piping Industry experts:
* Kathey Ferland, Project Manager, University of Texas at Austin
* Thomas J. Van Laan, P.E., Senior Vice President, Intergraph, CADWorx & Analysis Solutions
* Paul Spring, President, Business Development and Product Strategy, AVEVA
Dinner will be served. In conjunction with the Annual Meeting, a Professional Piping Designer Certification Review and Exam will be held on October 28th with Dr. William G. Beazley at the Marriott from 8 A.M. until 5:00 P.M. For more information, or to register, please send SPED an email at spedmgr1@spedweb.com.
Look for our booth at this year’s SPED Corporate Member Showcase!
test service nolan
The variable spring and clamp assemblies are fabricated using a combination of carbon steel for the housing and internal components, spring steel for the spring coils, and Cro-Moly (A-387 GR. 22) for the high temperature 3-bolt clamps. This pipe hanger assembly is an example of PT&P’s standard variable spring design wherein multiple coils are arranged in series to produce adequate load carrying capacity and coil deflection to compensate for the anticipated pipe movement. These particular assemblies are capable of an overall load range of 9,320 lb. to 15,970 lb. with a total travel range of 5″. All pipe hanger assemblies underwent standard load and travel testing, 100% deflection testing, and load cell calibration before shipping to a power generation facility.
Want to learn more about variable springs? Watch a recorded variables webinar!
