Piping Technology & Products joins the Houston Independent School District in giving back to the community.
PT&P in the Community: Back To School
September 11, 2017
Blog
PT&P’s Sizzling Summer: Supports, Services & Safety
August 8, 2017
Have a look into our new Expansion Joint Course
August 1, 2017
Expansion Joint Application and Design Course:
This course covers how to provide flexibility in the piping system by employing expansion joints to accommodate thermal expansion and contraction of sections of pipes or ducts.
Learn more about the Expansion Joint Course and more
Read More
C-Type Constant Spring Supports for a Refinery in Texas
July 10, 2017
| Type: | Constant Spring Supports |
| Size: | 25″ in Height x 17-38″ in Length x 11-5/8″ in Width |
| Material: | A-36 Carbon Steel with HDG Finish |
| Design: | 981 lb. to 1828 lb. load | 2-1/2″ to 3″ Vertical Movement Range |
| Testing: | Standard Load and Travel Testing per MSS Standards |
Piping Technology & Products, Inc. designed and manufactured C-type constant spring support assemblies for a refinery in Texas. The constants are 25″ in height, 17-3/8″ in length, and 11-5/8″ in width. Their load capacities range from 981 lb. to 1828 lb., with a vertical movement ranging from 2-1/2″ to 3″. All constants were fabricated from A-36 carbon steel with a hot-dipped galvanized finish, and underwent standard load and travel testing per MSS Standards prior to shipment.
Read MoreIt’s National Safety Month: Hear What Our Safety Team Has to Say
June 27, 2017
At PT&P, safety always comes first. It’s National Safety Month so we took some time to visit with our top, industry-rated Safety Department and find out first-hand from the experts how they help us all keep each other safe.
F-Type Variable Springs for a Refinery in Oklahoma
June 26, 2017
|
PT&P manufactured variable spring supports for a refinery in Oklahoma. These F-Type PTP-6 spring cans are 70 7/8″ tall and 17 3/4″ wide. They are completely fabricated from carbon steel with PTFE slide plates welded on the load flange and internal guide. They are designed for an operating load of 30,980 lb. .with a spring rate of 2,083 lb./in. and 0.49″ of movement. These variables were hydrotested with a load of 35,000 lb. prior to shipment.
Read More3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas
June 10, 2017
|
These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.
Read MoreStructural Supports Custom Designed for a Liquefaction Project
May 22, 2017
|
Piping Technology & Products custom designed these structural supports to provide base support for pipes at a liquid natural gas (LNG) facility in Louisiana. The supports are fabricated from carbon steel with a hot-dipped galvanized finish. Sizes range from 6″ x 12″ to 6″ x 18″ and all supports underwent a quality control inspection prior to shipment.
Read MoreCustom Designed Bolt Cradle Supports for a Chemical Plant in Texas
March 20, 2017
| Type: | Custom Bolt Cradle Pipe Supports |
| Size: | 24″ to 36″ Diameter Range |
| Material: | Hot-dipped Galvanized Carbon Steel | Gasket Sealing Material |
| Testing: | Dimensional and Visual Inspection |
These supports are custom designed similar to a PTP Fig.900 bolt cradle support. They are fabricated from hot-dipped galvanized carbon steel and were designed for pipe sizes ranging from 24″ to 36″ in diameter. The assemblies include a gasket sealing material that will be installed between the pipe shoe and pipe. The pipe supports underwent dimensional and visual inspection, and stainless steel tags were riveted to the shoes prior to shipping to a chemical plant in Texas.
Read More