|
PT&P manufactured variable spring supports for a refinery in Oklahoma. These F-Type PTP-6 spring cans are 70 7/8″ tall and 17 3/4″ wide. They are completely fabricated from carbon steel with PTFE slide plates welded on the load flange and internal guide. They are designed for an operating load of 30,980 lb. .with a spring rate of 2,083 lb./in. and 0.49″ of movement. These variables were hydrotested with a load of 35,000 lb. prior to shipment.
Sign-up for a Live Technical Webinar…
In this presentation, we explore the details of actual case studies focusing on various signs that indicate if a particular support needs replaced or adjusted. The presentation also covers projects that brought on new standard designs and custom designs for specific applications. And lastly, it includes valuable additions and procedures that extend the typical lifespan of a pipe support. PT&P’s field service division is available 24×7 in the case of an emergency situation or for a scheduled shutdown.
August 6th: Fabric Expansion Joints Webinar by U.S. Bellows, Inc. 10:00 am OR 2:00 pm
August 13th: Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar 10:00 am OR 2:00 pm
August 20th: U.S. Bellows 101 - The Basics of Expansion Joints 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
