Resources

Resources

Type-C Variable Assemblies with Dual Travelers for a De-coker Unit

test service nolan

Type-C Variable Assemblies with Dual Travelers for a De-coker Unit

Type: Variables with dual travelers
Design: Operating load: 1,698-21,756 lbs
Material: A36 Carbon Steel with HDG finish
Size: Horizontal Travelers range from size 2 to size 4

These dual travelers with type-C variable spring hanger assemblies were custom-designed by Piping Technology & Products for valves in a de-coker unit in Texas. All completed assemblies were fabricated from A36 carbon steel with an HDG finish. The travelers range from size 2 to size 4 and are designed for 12″ of horizontal movement. The variables are designed for operating loads ranging from 1,698-21,756 lbs.

2016 PT&P Product Highlights

test service nolan

 

300 Furnace Springs for Methanol Facility Neoprene Expansion Joints Designed for Generator Fan 14” Diameter Pipe Clamp Assemblies
300 Furnace Springs for Methanol Facility Neoprene EJ’s for Generator Fan 14” Diameter Pipe Clamp Assemblies

 

Emergency Refurbishment of Universal Expansion Joint Hydraulic Snubbers Designed For LLDPE Chemical Plant
Emergency Refurbishment of Universal Expansion Joint Hydraulic Snubbers Designed For LLDPE Chemical Plant
Tied Universal EJ With Elbow Special Mini Sway Strut Assemblies for LNG Plant Custom Sway Strut Assembly for LNG Plant
134″ Tied Universal EJ With Elbow Special Mini Sway Strut Assemblies for LNG Plant Custom Sway Strut Assembly for LNG Plant
Over 400 Clevis Hanger Assemblies Designed for a Pulp and Paper Plant Cold Shoes for Air Separation Unit Neoprene EJ's for Gas Turbine
Over 400 Clevis Hanger Assemblies Designed for a Pulp and Paper Plant Cold Shoes for Air Separation Unit Neoprene EJ’s for Gas Turbine
Big Ton Spring Supports Custom Designed for an LNG Facility in Australia Clamshell Spools Designed for an Exhaust Wall Protrusion Clamshell
Big Ton Spring Supports Custom Designed for an LNG Facility in Australia Clamshell Spools Designed for an Exhaust Wall Protrusion Clamshell
Custom Designed Universal Gimbal Hinged Expansion Joint Universal Hinged Fabric Expansion Joints For Chemical Plant
Custom Designed Universal Gimbal Hinged Expansion Joint Universal Hinged Fabric Expansion Joints For Chemical Plant

 

Variable Spring Hanger Assemblies U-Type Constant Spring Supports Hinged Expansion Joints Designed for a Chemical Plant
Variable Spring Hanger Assemblies U-Type Constant Spring Supports Hinged Expansion Joints Designed for a Chemical Plant
Hinged Expansion Joints Designed for a Pipeline Big Ton Spring Supports Designed for a Pressure Vessel Seismic Universal Rectangular Expansion Joints
Hinged Expansion Joints Designed for a Pipeline Big Ton Spring Supports Designed for a Pressure Vessel Seismic Universal Rectangular Expansion Joints
Thick Wall Flanged and Flued Head Expansion Joints Hydraulic Snubbers For An Ammonia Plant Fabric Expansion Joint For A Ventilation Air Filter System
Thick Wall Flanged and Flued Head Expansion Joints Hydraulic Snubbers For An Ammonia Plant Fabric EJ For A Ventilation Air Filter System
PTFE Coated Single Expansion Joints Adjustable Pipe Stands for a Crude Oil Terminal Constant Spring Supports For Power Plant
PTFE Coated Single Expansion Joints Adjustable Pipe Stands for a Crude Oil Terminal Constant Spring Supports For Power Plant
Fabric EJ Designed for a Natural Gas Application Custom Designed Pipe Hanger And Clamp Assemblies
Fabric EJ Designed for a Natural Gas Application Custom Designed Pipe Hanger And Clamp Assemblies
Hinged Expansion Joints Designed for a Pipeline Variables Springs With Bronzphite Slide Plates Variable Springs For Furnace Application
Hinged Expansion Joints Designed For A Pipeline Variables Springs With Bronzphite Slide Plates Variable Springs For Furnace Application
Stainless Steel Pipe Rollers Universal Expansion Joint With Floating Flanges Cold Insulated Pipe Saddles with Slide Plates Custom Designed Elbow Pressure Balanced EJ
Stainless Steel Pipe Rollers Universal Expansion Joint With Floating Flanges Cold Insulated Pipe Saddles with Slide Plates Custom Elbow Pressure Balanced EJ
Emergency Refurbishment of Universal Expansion Joint Heavy Duty Pipe Saddles Designed for an Ethane Craker
Externally Pressurized EJ’s Designed for a Pipeline Heavy Duty Pipe Saddles Designed for an Ethane Craker
Cold Shoes For A Chemical Plant Custom Designed Big Ton Springs Single Externally Pressurized Expansion Joints
Cold Shoes For A Chemical Plant Custom Designed Big Ton Springs Single Externally Pressurized Expansion Joints
Compact Spring Supports Designed for an Oil Refinery Sway Strut and Pipe Clamp Assemblies For Energy Combustibles And Lubricants Facility
Compact Spring Supports Designed for an Oil Refinery Sway Strut and Pipe Clamp Assemblies For Energy Combustibles And Lubricants Facility
U-Type Constants With PTFE Slide Plates Custom Engineered PTFE Fabric Expansion Joint 9’ Rectangular Metallic Expansion Joint
U-Type Constants With PTFE Slide Plates Custom Engineered PTFE Fabric Expansion Joint 9’ Rectangular Metallic Expansion Joint
G-Type Variable Spring Assemblies Designed for Oil and Gas Refinery Universal EJ For Power Plant Custom Designed Single Expansion Joints
G-Type Variable Spring Assemblies Universal EJ For Power Plant Custom Designed Single Expansion Joints

Happy Holidays from Piping Technology & Products

test service nolan

Custom Designed Pipe Clamp and Sway Strut Assemblies for an Ethane Cracker Facility in Texas

test service nolan

Custom Designed Pipe Hanger and Pipe Clamp Assemblies for an Ethane Cracker Facility in Texas

Type: Pipe Clamp and Sway Strut Assemblies
Design: Operating load: 99,650 lb. | Temperature: 550°F
Material: A36 Carbon Steel
Size: Clamps: 149″ L x 14″ W x 2″ T | Load Bolt: 4-1/2″ | 68″ Dia. Pipe

Piping Technology & Products custom designed pipe clamp and sway strut assemblies assemblies for an ethane cracker facility in Texas. The clamps are designed for a 68″ diameter pipe using a bar size of 149″ long x 14″ wide x 2″ tall. The load bolt size is 4-1/2″ and the inside bolts, rods, nuts, and turnbuckle are 4″ diameter. The assemblies are completely fabricated from A36 carbon steel, and designed for an operating temperature of 550°F with a load capacity up to 99,650 lb. A visual inspection test with sample pipe and dimensional check were conducted prior to shipment.

Sway Strut and Pipe Clamp Assemblies Designed for an Energy Combustibles and Lubricants Facility

test service nolan

Sway Struts with Pipe Clamps for Energy Combustibles and Lubricants Facility in Argentina

Piping Technology & Products designed these Fig.2110F sway struts and pipe clamp assemblies for an energy combustibles and lubricants facility in Argentina. The sway struts are 60″ in length with clamp sizes of 16″ and 12″ diameters. All components were fabricated from A-36 carbon steel. They are designed for an operating load of 4,500 lb. The sway struts are designed to let the pipe sway within a certain radius.

Type: Sway Strut and Pipe Clamp Assemblies
Design: 4,500 lbs load
Material: A-36 Carbon Steel
Function: Let the pipe sway within a certain radius

Work-Life Success at Piping Technology and Products

test service nolan

PT&P valued employees discuss the importance of a healthy and flexible work environment

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

test service nolan

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

Type: Pipe Roller Stands
Design: 1,000 lb. Load | 30″ Dia. Pipe | 18-3/4″ x 13″ x 10-3/16″ BOP
Material: Stainless Steel
Function: For support of piping that expands and contracts longitudinally and where vertical adjustment is not necessary.

Piping Technology & Products, Inc. designed pipe roller stands fabricated from stainless steel for a wastewater treatment plant. Each roller has two spring housings with eight springs in each. They are designed for an operating load of 1,000 lb. on a 30″ diameter pipeline. The rollers measure 18-3/4″ x 13″ x 10-3/16″ BOP and went through quality control inspection and tests prior to shipment.

Adjustable Pipe Stands Designed for a Crude Oil Terminal in Texas

test service nolan

Adjustable Pipe Stands Designed for a Crude Oil Terminal in Texas

Type: Adjustable Pipe Stands / Saddles
Design: 3″ to 25″ Dia. | +/-2″ Adjustment
Material: Carbon Steel with a HDG Finish
Function: Allow adjustment after expansion and contraction

Piping Technology & Products, Inc. designed and fabricated fifty-seven adjustable pipe stands for a Crude Oil Terminal in Texas. All the supports are fabricated from carbon steel with a hot-dipped galvanized finish. They are designed for 3″ to 25″ diameter pipelines with +/- 2″ of adjustment. Each base plate has been pre-drilled to accept anchor bolts provided at the site. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline.

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

test service nolan

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

Type: Heavy Duty Pipe Saddles
Design: 60″ Dia. | 23-5/8″ Length | 5-18″ from BOP
Material: Carbon Steel with a HDG Finish
Testing: Visual | Sample Pipe | Dimensional

Piping Technology & Products, Inc. designed and manufactured these heavy duty pipe saddles for the ethylene plant project in Texas. The saddles are fabricated from A36 carbon steel with a hot-dipped galvanized finish and designed to support pipes up to 60″ in diameter. They measure 23-5/8″ in length and 5-1/8″ from BOP. Standard Q.C., visual inspection with a sample pipe and dimensional tests were performed prior to shipment.

Variable Spring Supports Designed for a Furnace Application in Oklahoma

test service nolan

Variable Spring Supports Designed for a Furnace Application in Oklahoma

Type: Variable Spring Supports
Design: 1,765 lb. Load | +/- 5% Spring Rate
Material: Carbon Steel with Red Oxide Primer
Testing: Standard Spring Rate & Calibration Tests

PT&P custom designed variable spring supports for a furnace application at a Nitrogen Facility in Oklahoma. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The spring supports are designed to support loads up to 1,765 lb. With a spring rate calibrated to be within +/- 5% of the theoretical value.

Single Expansion Joints Product Video

test service nolan

All new design, new organization, and new resources to help you get the job done right the first time. Checkout our new web site intro video to get a complete overview of what to expect.

Big Ton Spring Supports Custom Designed for an LNG Facility

test service nolan

Big Ton Spring Supports Custom Designed for an LNG Facility

Type: Big Ton Spring Supports with PTFE Slide Plates
Size: 29-7/8″ x 29-7/8″ 16-1/2″
Material: Carbon Steel with HDG Finish | PTFE, 25% Glass Filled Slide Plate
Testing: Tested in a press connected to the load cell

PT&P custom designed big ton spring supports with PTFE slide plates for an LNG facility in Australia. The components within the spring housing include load columns, travel stops, spring coils and lifting lugs. Each assembly is designed for an operating load ranging from 16,276 lb. to 34,479 lb. and will allow for movement between 0.16″ and 0.24″. They are fabricated from hot-dipped galvanized carbon steel and measure 29-7/8″ x 29-7/8″ x 16-1/2″. The big ton spring support is ideal for applications that have very heavy loads with thermal expansion because of the stability they provide throughout the range of travel. These supports were tested in the press connected to a load cell to insure proper operation throughout the entire working range of the coils.

Cold Insulated Pipe Saddles with Slide Plates Designed for an Ethane Cracker at a Plant in Texas

test service nolan

Cold Insulated Pipe Saddles with Slide Plates Designed for an Ethane Cracker at a Plant in Texas

PT&P designed cold insulated pipe saddles with PTFE slide plates to provide sliding and guiding support for horizontal piping leading to an ethane cracker at a plant in Texas. The project fulfilled an emergency request when the client realized the product was missing at time of installation. The pipe saddles are fabricated from carbon steel with a hot-dipped galvanized finish for pipe sizes ranging from 3″ to 56″. They have a diameter of 40″, height of 23-5/8″, width of 42-1/2″ and 11-7/8″ BOP. Visual inspection and dimensional checks using a section of pipe were completed prior to shipment.

Constant Spring Supports Design and Application Webinar

test service nolan

This webinar is over, view the recording in the webinar archives

Constant Spring Support

This Webinar will focus on the different types of constant spring supports. Learn about the special features available, in addition to the design of a constant support. View how the different cam/coil configurations produce a unique response to an applied load. Discover the step by step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to adjust or replace a constant spring support, as well as shutdown and isolation procedures.

The featured presenter, Jerry Godina has over 15 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

127 Cryogenic Insulated Pipe Supports Designed for a Chemical Plant

test service nolan

127 Cryogenic Insulated Pipe Supports Designed for a Chemical Plant

PT&P custom designed 127 cryogenic insulated pipe supports for a chemical plant in Texas. They are designed for pipe sizes ranging from 1″ – 24″ diameter and operating loads up to 120,517 lb. The insulation is high density polyurethane foam (PUF) ranging from 1″ to 7″ in thickness. The shoe and bearing plates were fabricated from carbon steel with a hot-dipped galvanized finish. The jacket was fabricated from aluminized steel and includes a vapor barrier. Standard Q.C. and dimensional tests were performed prior to shipment.

Pipe Shields for Beginners: Insulated Pipe Supports… for Commercial Applications

test service nolan

This webinar is over, view the recording in the archives

Insulated Pipe SupportThis webinar will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides and anchors that it developed and patented over it’s 40 year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems and low pressure steam lines), installation and maintenance procedures and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This webinar will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!

Universal Expansion Joints Product Video

test service nolan

Big Ton Spring Supports Designed for Propane Dehydrogenation Facility

test service nolan

Big Ton Spring Supports Designed for Propane De-Hydrogenation Facility

PT&P custom designed big ton spring supports for a propane dehydrogenation facility in Texas. The components within these assemblies include the spring housing, load columns, travel stops, spring coils and lifting lugs. While both assemblies measure 42” x 24” x 26-1/2”, they were each modified based on independent specifications for operating loads and movement. The first will accommodate a load of 94,261 lb. and 0.085” of movement, while the second will accommodate a load of 102,219 lb. with 0.08” of movement.

This type of support is ideal for applications, such as pressure vessels, that combine very heavy loads with thermal expansion because of the stability they provide. The big tons were tested in the load cell to insure proper operation throughout the entire working range of the coils.

Pipe Clamp Design, Application & Installation Webinar

test service nolan

This webinar is over, view the recording in webinar archives

pipe-clamp-webinar_v28This presentation will cover Pipe Clamps, including Hold-Down Clamps, Riser Clamps, Clevis Hangers, Yoke U-Bolt Clamps and Structural Supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.

 

Shock Control, Restraint & Support Devices Webinar

test service nolan

This webinar is over, view the recording in the webinar archives

140,000 lb. Load Adjustable Hydraulic SnubbersExplore the various applications of snubbers, sway braces and sway struts in piping systems and equipment. Learn how these products help prevent pipe system failure due to seismic loads, flow transients, wind loads, safety valve thrust loads or pipe rupture. Discover the various tests performed within PT&P’s facility to ensure product quality, including cycle testing, travel testing and load testing. Finally, view the value-added services offered by PT&P and rest assure that your shock control, restraint and support device needs can be covered by our 24×7 web-based emergency services, field services and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 13 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

Top